For small items
Small items
Showing 1–48 of 212 results
- Extractors
Electric drive with adapter for all honey extractors
This electric drive can easily and inexpensively change the drive in our honey extractor from manual to electric. The engine is powered by 230V with a power of 120W. The MDD-01 controller used is a simple, manual potentiometer for changing the rotational speed. By using a specially designed adapter this drive can also be fitted to honey extractors from other manufacturers. The drives have a 2-year manufacturer’s warranty.
SKU: n/a - Honey Warming, NEW, Processing, Strainers
Conical Heating Spiral, Ø200mm
This conical heating spiral has been developed to aid and improve the filtration of honey. It allows the honey to be heated during filtration. This enables clear and pure honey to be filtered at a faster pace than without the use of the heating spiral.
Technical data:
- the device is made of stainless, acid-resistant steel
- power supply: 230 V
- heating power 65 W
- dimensions: length 380, width 200, height 380 mm
- weight: 1.25 kg
- the product complies with the requirements of Directive 2006/95 / WE, meets the requirements of the standards: PN EN 60519-1 and PN EN 60519-2 – “Safety of electrothermal devices, requirements for resistance devices”
SKU: n/a - Extractors
Electric drive BASIC for extractors produced by LYSON
This electric drive can easily and inexpensively change the drive in our honey extractor from manual to electric. The engine is powered by 230V with a power of 120W. The MDD-01 controller used is a simple, manual potentiometer for changing the rotational speed. This honey extractors is for Lyson honey extractors only. Drives come with a 2-year manufacturer’s warranty.
SKU: n/a - 12 Frame National Poly Hive, NEW
WiFi Hive Scale
SCALE-1 is one of supporting devices for BeePortal Apiary Management System. Received data are stored and visible within the hive area. Creating a few hives (max 3 for each SCALE-1 device) makes possibility to switch scale between hives and observe data for each hive individually.
IMPORTANT!
Before device installation make sure your hive is within a range of local WiFi. If is not, you will need WiFi extender device or other type of access point.
To interact with your device, you will need magnet included in set. It will turn on hidden button situated on top of the box to activate requested modes.
SKU: n/a - Double Thickness Pest Control Bee Suit, Protective Clothing
Double Thickness Pest Control Bee Suit
Our pest control bee suit is one of the leading suits in the UK market for offering safe and effective protection against bees, wasps and hornets. It’s thick material has been tested against flying insects, with the pest controller in mind, ensuring you are able to carry out a nest extermination in a comfortable manner, without having to worry whether you will get stung through the suit.
SKU: n/a - National Hive - CEDAR, National Poly Hive with Deep Roof (Old design)
Hive Stand
Galvanized steel stands. The item consists of two steel stands only. To complete the stand a separate purchase of 2 wooden beams with dimensions of 40×60 mm is required. Both stands have adjustable legs which allow for positioning of the stand. Height range 14.5cm-50cm.
Price is for one pair of metal stands only – wooden beams not included.
SKU: 8251603415|#|18172757 - NEW, Tanks, Bottling, Valves
Tilting Stand with Spring
Fill the settling tank and place it on the tilting stand. The tilting stand adjusts itself depending on the weight of the tank. When the settling tank weighs between 10kg and 12kg the spring starts to incline the stand automatically, tilting the tank so the honey still flows. A desired position can be held by locking the adjusting ring.
Settling tank not included.
SKU: n/a - Polystyrene Nucleus
National Poly 6 Frame Nucleus 14 x12
Comes with Brood Chamber with built-in Open Mesh Floor, Miller Style Feeder &Lid & Eke to take 14×12 frames.
Lid is now 105mm deep with approx. 40mm of thickness to the top of the roof for better insulation and a cavity underneath which enables you to feed candy if you should so desire.
FRAMES ARE NOT INCLUDED.
SKU: n/a - Frames
14” x 12” National Frames Assembled with Foundation
Our 14” x 12” National frames are used in British National brood boxes and come in packs of 10, assembled and pre-wired with foundation embedded.
- Top bar- 17″ x 7/8” (431mm x 22mm)
- Side bar- 12” x 1 3/8” (305mm x 35mm)
- Bottom bar- 14″ (356mm)
Note: the size of the top bar is now equivalent to the size of DN4 national frames.
All our 14” x 12” frames are 1st quality and contain no knots.
SKU: n/a - 12 Frame National Poly Hive 14 x 12
12 Frame National Poly Brood Box 14 x 12
Our rebated brood boxes have an improved aesthetic look and a greater ergonomic grip on two faces of the boxes. They have one entrance in the middle of the front face, allowing you to perform advanced manipulations to the brood for increases or swarm control.
- The Brood Body holds 12 Hoffman frames
- External dimension 490mm x 490mm
This brood box only works with the 12 Frame National Poly Hive 14 x 12
SKU: n/a - Polystyrene Nucleus
Nat Poly 6 Frame Nucleus
Comes with Brood Chamber with built-in Open Mesh Floor, Miller Style Feeder & Lid.
Lid is now 105mm deep with approx. 40mm of thickness to the top of the roof for better insulation and a cavity underneath which enables you to feed candy if you should so desire.
FRAMES ARE NOT INCLUDED.
SKU: n/a - Frames
SN4 National Frames – Pack of 50
Our SN4 national frames are used in British National and WBC shallow super boxes and come flat-packed, in packs of 50. They are Hoffman style which means they are self-spacing and require no lug spacers. The dimensions of the frames are:
- Top bar- 17″ x 7/8” (431mm x 22mm)
- Side bar- 5½” x 1 3/8” (216mm x 35mm)
- Bottom bar- 14″ (356mm)
All our SN4 frames are 1st quality and contain no knots.
SKU: n/a - Frames
DN4 National Frames – Pack of 50
Our DN4 national frames are used in British National and WBC Deep brood boxes and come flat-packed, in packs of 50. They are Hoffman style which means they are self-spacing and require no lug spacers. The dimensions of the frames are:
- Top bar- 17″ x 7/8” (431mm x 22mm)
- Side bar- 8½” x 1 3/8” (216mm x 35mm)
- Bottom bar- 14″ (356mm)
All our DN4 frames are 1st quality and contain no knots.
SKU: n/a
