Tanks, Bottling, Valves
Showing 1–48 of 51 results
- Tanks, Bottling, Valves
Honey Settling Tank 200l – Premium Line
Made from stainless steel this Premium Line Tank features a conical bottom welded with stainless steel pipe allowing draining of the tank without the need to tilt.
Equipped with a stainless steel lid with clamps and gasket.
- Diameter: 600mm
- Height: 920mm
- Valve: 2″
SKU: n/a - Tanks, Bottling, Valves
Honey Settling Tank 100l – Premium Line
Made from stainless steel this Premium Line Tank features a conical bottom welded with stainless steel pipe allowing draining of the tank without the need to tilt.
Equipped with a stainless steel lid with clamps and gasket.
- Diameter: 500mm
- Height: 760mm
- Valve:6/4 (~40mm)
SKU: n/a - Tanks, Bottling, Valves
Honey Settling Tank 70l – Premium Line
Made from stainless steel this Premium Line Tank features a conical bottom welded with stainless steel pipe allowing draining of the tank without the need to tilt.
Equipped with a stainless steel lid with clamps and gasket.
- Diameter: 400mm
- Height: 760mm
- Valve:6/4 (~40mm)
SKU: n/a - Tanks, Bottling, Valves
Honey Settling Tank 50l – Premium Line
Made from stainless steel this Premium Line Tank features a conical bottom welded with stainless steel pipe allowing draining of the tank without the need to tilt.
Equipped with a stainless steel lid with clamps and gasket.
- Diameter: 400mm
- Height: 595mm
- Valve:6/4 (~40mm)
SKU: n/a - Honey Warming, Tanks, Bottling, Valves
35l/50kg Heated Stainless Steel Bottling Tank
A new, innovative honey bottler. This honey bottler has a sloping floor and heated bottom. The sloping floor enables the honey to be completely emptied without tilting the container. In addition, the bottom is welded on the edge and can therefore be ideally cleaned without the rest of the honey remaining in the lateral gap.
The outlet valve is 105 mm from the ground.
Specification:
- 500 watts/230 volts
- Diameter 309mm
- Height 610 mm
- Temperature range from 20 – 45 degrees
SKU: n/a - Tanks, Bottling, Valves
Honey Valve 40mm (1½ inch)
This 40mm (1½ inch) plastic honey valve comes complete with ‘o’ ring seals to prevent leakage and stainless steel hardware. This valve quickly turns the flow of honey on and off, making extremely easy to fill your honey jars without a sticky mess.
Required hole size for fitting the valve = 48mm (1⅞ inch).
SKU: n/a