No products in the basket.
Creaming Machines, Processing
Manual Wax Press – Screw Driver
Availability:
In stock
Manual Wax Press
Press is used for recovering of honey from uncappings that are left out as a residue in uncapping process. There is still a lot of honey to be extracted from it. Cold-press method can be used to do so
Parameters of the press:
Press made of acid- resistant stainless steel
Rack is made of powder coated steel
Tank’s bore diameter: 250 mm
Tank height: 355 mm
Height of the press (without crank) 725 mm
- Length of the drain tray 390 mm
Width of drain tray 345mm
- As standard, we add special pads to the device to increase the comfort and safety of bee-keeping. Thanks to them, the vibrations are minimized. The pads are made of PVC (Soft) material.
£499.00 inc. VAT
In stock
- Creaming Machines, Processing
Manual Wax Press – Screw Driver
Manual Wax Press
Press is used for recovering of honey from uncappings that are left out as a residue in uncapping process. There is still a lot of honey to be extracted from it. Cold-press method can be used to do so
Parameters of the press:
Press made of acid- resistant stainless steel
Rack is made of powder coated steel
Tank’s bore diameter: 250 mm
Tank height: 355 mm
Height of the press (without crank) 725 mm
- Length of the drain tray 390 mm
Width of drain tray 345mm
- As standard, we add special pads to the device to increase the comfort and safety of bee-keeping. Thanks to them, the vibrations are minimized. The pads are made of PVC (Soft) material.
SKU: n/a
£1,398.99 for 3 item(s)
Related products
- Creaming Machines, Processing
Small Honey Dryer
This device is a very compact honey dryer. It’s a great addition for those who are limited with space.
If honey has excess moisture, it needs the water evaporating from the honey. This can be done using this small honey dryer. The honey runs through the honey cascade, a series of solid metal sieves, and the connected dehumidifier dries the air in a closed circuit without touching the honey. The ideal fluidity of honey through the cascade is 15 kg in 30 minutes.
The honey is warmed up a little via the heating system and slowly flows through the cascade. The temperature in the cascade and the hose is regulated by a heating coil. It is important that the honey does not go through the device too quickly. If the honey is too runny, it will need to cool down.
The honey runs down into the settling tank at the bottom which has a convenient tap for bottling.
SKU: n/a - Creaming Machines
Honey Creaming and Liquefier Machine 100L
Honey creaming machine is a designed to blend honey to a creamed consistency. Made of acid proof stainless steel and fitted with a fully automated controller. Achieving creamed honey is a slow process that requires each batch to “rest” between mixing cycles. The customised controller allows you to set the mixing and rest cycles to any combination to reach your desired consistency. Typically 15 minutes of mixing to one hour of “rest”.
Equipped with electric heating cables around the drum providing consistent heating and a temperature controller which prevents the honey from overheating. This creamer be also be used for warming crystalised honey and can be fitted with a honey bottling valve to assist with jarring your honey.
The creamer can also be easily connected the honey bottling machine for a seamless automated process.
Capacity: 100L/140kg
Drum diameter inside: 500 mm
Drum diamter outside: 600 mm
Valve: 6/4
Power supply: 230V
Controller: C-05
Motor: 550W
Heating power: 440W
Temp. regulator: MHC-01
Temp. regulation: 30 – 55ºC
Heated and insulated sides and bottom.
Maximum speed: 36 RPM.SKU: n/a - Creaming Machines
Honey Dryer 70kg
The device consists of a dehydration chamber, a set of rotating plates, and a warm-air blowing unit. Operating the dryer is straightforward. First, honey is placed into the main chamber. The device is then closed and powered on.
Once activated, the internal plates begin rotating steadily, collecting the honey as it is mixed and dried on their surfaces. The internal temperature is precisely regulated by a dedicated sensor, ensuring the product remains safe throughout the process.
The dryer allows smooth and precise adjustment of both the plate rotation speed and the temperature range. For the valve system, we’ve implemented a high-grade 6/4″ stainless steel flap valve.
During testing, we processed 72 kg of honey through a complete drying cycle. The confirmed efficiency, based on the tests, was approximately a 2% moisture reduction per 12 hours.
SKU: n/a
