Shop
Showing 49–96 of 1066 results
- Clearance
MelliFlow Pro – Small Dents
The table has been designed several applications, and its main purpose is to unfold the frames. However, this is not all it offers. It is also equipped with a table heating function, which allows you to decrystallize and liquefy honey in slices. Heating cover, thanks to which it is possible to melt the caps remaining at the bottom of the table after uncapping the frames. In addition, thanks to the use of a hinged cover and two actuators, it is possible to open and close it conveniently. This functionality significantly improves the work of beekeepers and increases the efficiency of the process of uncapping and processing the combs.
Table construction – acid-resistant stainless steel, heated bottom, insulated with mineral wool
Heating cover construction – stainless steel, insulated.MelliFlow Pro – Small dents on the cover.
SKU: n/a - Creaming Machines
Honey Creaming and Liquefier Machine 100L
Honey creaming machine is a designed to blend honey to a creamed consistency. Made of acid proof stainless steel and fitted with a fully automated controller. Achieving creamed honey is a slow process that requires each batch to “rest” between mixing cycles. The customised controller allows you to set the mixing and rest cycles to any combination to reach your desired consistency. Typically 15 minutes of mixing to one hour of “rest”.
Equipped with electric heating cables around the drum providing consistent heating and a temperature controller which prevents the honey from overheating. This creamer be also be used for warming crystalised honey and can be fitted with a honey bottling valve to assist with jarring your honey.
The creamer can also be easily connected the honey bottling machine for a seamless automated process.
Capacity: 100L/140kg
Drum diameter inside: 500 mm
Drum diamter outside: 600 mm
Valve: 6/4
Power supply: 230V
Controller: C-05
Motor: 550W
Heating power: 440W
Temp. regulator: MHC-01
Temp. regulation: 30 – 55ºC
Heated and insulated sides and bottom.
Maximum speed: 36 RPM.SKU: n/a - Creaming Machines
Honey Creaming and Liquefier Machine 70L
Honey creaming machine is a designed to blend honey to a creamed consistency. Made of acid proof stainless steel and fitted with a fully automated controller. Achieving creamed honey is a slow process that requires each batch to “rest” between mixing cycles. The customised controller allows you to set the mixing and rest cycles to any combination to reach your desired consistency. Typically 15 minutes of mixing to one hour of “rest”.
Equipped with electric heating cables around the drum providing consistent heating and a temperature controller which prevents the honey from overheating. This creamer be also be used for warming crystalised honey and can be fitted with a honey bottling valve to assist with jarring your honey.
The creamer can also be easily connected the honey bottling machine for a seamless automated process.
Specifications:
- 70L capacity;
- 240V power supply;
- 0.18kW motor;
- 175W heating power
- temperature control from 30°C to 70°C (digital display);
- stainless steel valve
SKU: n/a - Creaming Machines
Honey Creaming and Liquefier Machine 50L PREMIUM
A perfect way to achieve creamed honey. Equipped with electric heating cables around the drum providing consistent heating and a Temperature controller which prevents the honey from overheating.
This creamer be also be used for warming crystalised honey and can be fitted with a honey bottling valve to assist with jarring your honey.
The creamer can also be easily connected the honey bottling machine for a seamless automated process.
The process of creaming should take place in repetitive work – rest cycles
Stirrer operation – 15 min
Rest 45 mins.SKU: n/a - Honey Warming, Uncapping Tables and Trays
MelliFlow
The table has been designed for several applications, but the basic one is the uncapping of the frames. In addition, it has the function of heating them, which allows you to decrystallize and liquefy honey in slices. Heating cover, thanks to which it is possible to melt the caps remaining at the bottom of the table after uncapping the frames. In addition, thanks to the use of a hinged cover and two actuators, it is possible to open and close it conveniently. This functionality significantly improves the work of beekeepers and increases the efficiency of the process of uncapping and processing the combs.
SKU: n/a - Strainers
Honey Sump 1500mm, heated
Designed specifically for the clarification of large quantities of honey.
This Honey Sump comes fully insulated. The body of the sump can be set to a temperature between 30 -55 degrees.
Honey from the extractor is fed into the sump in its raw state. This flows through the sump passing through different grade filters each removing wax and cappings from the honey whilst it is gently heated. The clarificaton process is complete once the honey passes through the finest grade filter.
SKU: n/a - Creaming Machines
Honey Creaming Machine 200L
Honey creaming machine is a designed to blend honey to a creamed consistency. Made of acid proof stainless steel and fitted with a fully automated controller. Achieving creamed honey is a slow process that requires each batch to “rest” between mixing cycles. The customised controller allows you to set the mixing and rest cycles to any combination to reach your desired consistency. Typically 15 minutes of mixing to one hour of “rest”.
The creamer can be fitted with a ball valve or honey bottling valve to assist with jarring your honey and can easily be connected the honey bottling machine for a seamless automated process.
Specifications:
- 200L capacity;
- 240V power supply;
- 1.1kW motor;
- Frequency 50Hz;
- 600mm Diameter drum
- 730mm Height
- Stainless steel valve
SKU: n/a - Creaming Machines
Honey Creaming and Liquefier Machine 50L
Honey creaming machine is a designed to blend honey to a creamed consistency. Made of acid proof stainless steel and fitted with a fully automated controller. Achieving creamed honey is a slow process that requires each batch to “rest” between mixing cycles. The customised controller allows you to set the mixing and rest cycles to any combination to reach your desired consistency. Typically 15 minutes of mixing to one hour of “rest”.
Equipped with electric heating cables around the drum providing consistent heating and a temperature controller which prevents the honey from overheating. This creamer be also be used for warming crystalised honey and can be fitted with a honey bottling valve to assist with jarring your honey.
The creamer can also be easily connected the honey bottling machine for a seamless automated process.
Specifications:
- 50L capacity;
- 240V power supply;
- 0.18kW motor;
- 175W heating power
- temperature control from 30°C to 70°C (digital display);
- stainless steel valve
SKU: n/a - Extractors
3-in-1 Extractor and Uncapper
This all-in-one system integrates three separate pieces of equipment into one: a radial honey extractor, uncapping table and strainer. Because of its compact size, it’s ideal for the hobbyist and commercial beekeepers because storage and space can sometimes be restricted. The drum and basket are made from acid resistant stainless steel. It is stable and easy to dismantle. The lid is made from perspex and fitted with a safety lock. A user friendly workspace allows you to uncap and move frames directly into a 20 frame radial extractor while a set of stainless steel sieves strains wax cappings and settles honey with that of the extracted honey for one combined source coming from the tanks honey gate.
Height 1300 mm
Width 710 mm
Length 1200 mmHoney capacity: bottom of extractor will hold up to about 47kg of honey before overflowing the extractor shaft.
- Radial extractor holds 8 deep frames or 20 shallow frames
- Includes a stainless honey gate
- Controller with 10 speeds
- 120V AC power
- Power supply 230V
SKU: n/a - Creaming Machines
Honey Creaming Machine 150L
Honey creaming machine is a designed to blend honey to a creamed consistency. Made of acid proof stainless steel and fitted with a fully automated controller. Achieving creamed honey is a slow process that requires each batch to “rest” between mixing cycles. The customised controller allows you to set the mixing and rest cycles to any combination to reach your desired consistency. Typically 15 minutes of mixing to one hour of “rest”.
The creamer can be fitted with a ball valve or honey bottling valve to assist with jarring your honey and can easily be connected the honey bottling machine for a seamless automated process.
Specifications:
- 150L capacity;
- 240V power supply;
- 1.1kW motor;
- Frequency 50Hz;
- 500mm Diameter drum
- 730mm Height
- Stainless steel valve
SKU: n/a - Honey Warming
Honey Warming Cabinet 180cm
Honey Warming Cabinet 180cm
Equipped with heaters and three air circuits forced by fans, which allows the temperature to be kept evenly throughout the chamber.
This cabinet will hold up to 14 x 30 lb buckets, dependant on the shape or 9 standard National supers which can be placed directly into the cabinet to warm before extraction. It will warm the honey to a maximum temperature of 55 degrees.
The cabinet can also be used to dry pollen.SKU: n/a - Strainers
Heated Honey Sump 1000mm
Designed specifically for the clarification of large quantities of honey.
This Honey Sump comes fully insulated. The body of the sump can be set to a temperature between 30 -55 degrees.
Honey from the extractor is fed into the sump in its raw state. This flows through the sump passing through different grade filters each removing wax and cappings from the honey whilst it is gently heated. The clarificaton process is complete once the honey passes through the finest grade filter.
SKU: n/a - Honey Warming, Wax Melting
Cappings Wax Melter / Honey Liquefier
- Latch lock lid with insulated heating unit and fan
- Capacity of the uncapping wax melter: about 35 kg of wax lids per pass.
- Removable, black insulating jacket for the heating unit
- Double-walled, 2 cm thick insulated stainless steel kettle
- Sloping floor with stainless steel pinch valve and floor-level outlet
- Supplied with removable feet with castors with parking brakes
- Diameter outside 54 cm, inside 52 cm
- Working and boiler height 118 cm
- Interior height 71 cm
- Temperature setting by thermostat between 30°- 110°C.
- Power of 2.5 kW / 230V
- Weight about 45kg
SKU: n/a - Creaming Machines, Processing
Small Honey Dryer
This device is a very compact honey dryer. It’s a great addition for those who are limited with space.
If honey has excess moisture, it needs the water evaporating from the honey. This can be done using this small honey dryer. The honey runs through the honey cascade, a series of solid metal sieves, and the connected dehumidifier dries the air in a closed circuit without touching the honey. The ideal fluidity of honey through the cascade is 15 kg in 30 minutes.
The honey is warmed up a little via the heating system and slowly flows through the cascade. The temperature in the cascade and the hose is regulated by a heating coil. It is important that the honey does not go through the device too quickly. If the honey is too runny, it will need to cool down.
The honey runs down into the settling tank at the bottom which has a convenient tap for bottling.
SKU: n/a - Pumps, Strainers
Vertical Multi Filter
This verticle filter is equipped with 4 nozzles and allows easy filtering of honey via a pump. The vertical pipe is finished with the
connector that enables easy filter-to-pump hose insertion. Each of these 4 filters can be switched on or off by turning the appropiate valve which is also useful during the cleaning of each filter.The entire set rests on 4 legs with adjustable spacing for easy fitting onto all types of uncapping tables (the table is not a part of the device – to be purchased separately).
- 2 stainless steel acid resistant pipes 48mm (6/4”) diameter.
- 42 mm (5/4”) with ball valves and flexible sieves.
- The filter can be fitted onto 1000 or 1500 mm tables.
SKU: n/a - Honey Warming, New Product
Honey Liquefier 200L – Premium Line
Capacity 200 litres;
Conical bottom;
Material stainless steel 0H18N9 (AISI 304);
Heating Power 520W;
Temperature control from 30°C – 55°C;
Digital display;
Flap valve 2″;
Dimensions (inner Ø, outer Ø, outer height) 600/700 / 910 mm;SKU: n/a - Creaming Machines
Honey Creaming Machine 100L
Honey creaming machine is a designed to blend honey to a creamed consistency. Made of acid proof stainless steel and fitted with a fully automated controller. Achieving creamed honey is a slow process that requires each batch to “rest” between mixing cycles. The customised controller allows you to set the mixing and rest cycles to any combination to reach your desired consistency. Typically 15 minutes of mixing to one hour of “rest”.
The creamer can be fitted with a ball valve or honey bottling valve to assist with jarring your honey and can easily be connected the honey bottling machine for a seamless automated process.
Specifications:
- 100L capacity;
- 240V power supply;
- 0.37kW motor;
- Frequency 50Hz;
- 500mm Diameter drum
- 610mm Height
- Stainless steel valve
SKU: n/a - New Product, Pumps
Portable Honey Pump 0.37kW
The unit is characterised by its compact dimensions, which makes it easy to carry and integrate in various working conditions.
• Stand, pump body and control housing made of stainless steel grade 1.4301 (AISI 304);
• Power supply – 230V;
• Power/engine -0.37kW;
• Efficiency – approx. 900l/hour;
• Set of couplings for quick assembly on Fi-40 hose;
• Function to change pump direction;
• Smooth regulation of impeller speed.Weight 12 kg.
SKU: n/a - Processing, Uncapping Tables and Trays
Universal Heather Loosener
Manufactured from stainless steel the Abelo heather loosener can be used for all types of frames. This versatile machine uses spring loaded needles to agitate the honey in the frame causing it to soften prior to extraction.
The frame is placed between the metal plates and then using the ergonomic lever the needles press into the honeycomb as the frame moves along each with each motion.SKU: n/a - Uncapping Tables and Trays
Vertical Uncapping Machine with Double Electric Knives
The vertical uncapping machine is designed for cutting wax from both sides of a frame simultaneously.
The device consists of a vertical stainless steel frame and guidance mechanism with two electric sideways knives.SKU: n/a - Extractors
Manley Electric12 Frame Radial Extractor 240V/12V
Our extractors are made from acid-proof stainless steel and fitted with an easy to use 10 speed electric control system. All extractors are fitted with a two part lid system with built in safety mechanism that stops the motor if the lid is opened whilst spinning. There is also an emergency stop button.
Fits 12 Manley Frames or 20 National Shallow Frames or 8-12 Deep National Frames.
SKU: n/a - Honey Warming, New Product
Honey Liquefier 150L – Premium Line
Capacity 150 litres;
Conical bottom;
Material stainless steel 0H18N9 (AISI 304);
Heating Power 440W;
Temperature control from 30°C – 55°C;
Digital display;
Flap valve 6/4″;
Dimensions (inner Ø, outer Ø, outer height) 500/600 / 985 mm;
Weight 39.00 kg.SKU: n/a - Extractors
Electric 20 Frame Radial Extractor 240V/12V
Our extractors are made from acid-proof stainless steel and fitted with an easy to use 10 speed electric control system. All extractors are fitted with a two part lid system with built in safety mechanism that stops the motor if the lid is opened whilst spinning. There is also an emergency stop button.
Will take 20 shallow or 8 deep frames: National, Smith, Langstroth;
SKU: n/a - Creaming Machines
Honey Creaming Machine 70L
Honey creaming machine is a designed to blend honey to a creamed consistency. Made of acid proof stainless steel and fitted with a fully automated controller. Achieving creamed honey is a slow process that requires each batch to “rest” between mixing cycles. The customised controller allows you to set the mixing and rest cycles to any combination to reach your desired consistency. Typically 15 minutes of mixing to one hour of “rest”.
The creamer can be fitted with a ball valve or honey bottling valve to assist with jarring your honey and can easily be connected the honey bottling machine for a seamless automated process.
Specifications:
- 70L capacity;
- 240V power supply;
- 0.25kW motor;
- Frequency 50Hz;
- 400mm Diameter drum
- 610mm Height
- Stainless steel valve
SKU: n/a - Creaming Machines
Honey Creaming Machine 50L
Honey creaming machine is a designed to blend honey to a creamed consistency. Made of acid proof stainless steel and fitted with a fully automated controller. Achieving creamed honey is a slow process that requires each batch to “rest” between mixing cycles. The customised controller allows you to set the mixing and rest cycles to any combination to reach your desired consistency. Typically 15 minutes of mixing to one hour of “rest”.
The creamer can be fitted with a ball valve or honey bottling valve to assist with jarring your honey and can easily be connected the honey bottling machine for a seamless automated process.
Specifications:
- 50L capacity;
- 240V power supply;
- 0.18kW motor;
- Frequency 50Hz;
- 400mm Diameter drum
- 440mm Height
- Stainless steel valve
SKU: n/a - Honey Warming, New Product
Honey Liquefier 100L – Premium Line
Capacity 100 litres;
Conical bottom;
Material stainless steel 0H18N9 (AISI 304);
Heating Power 440W;
Temperature control from 30°C – 55°C;
Digital display;
Flap valve 6/4″;
Dimensions (inner Ø, outer Ø, outer height) 500/600 / 760 mm;
Weight 36.5 kg.SKU: n/a - New Product, Wax Melting
Hot Water Wax Melting Tank 100L
Specifications :
- Heater output 2.8 kW
- Power supply 230V
- Capacity 100L
- Temperature regulation 30 – 95 degrees
- Weight approximately 26 kg
- Insulated with mineral wool
- Drain valve of heating liquid 1/2″
- Water drain valve 1″
- Wax drain valve 1″
- Outside diameter 600 mm
- Inner diameter 500 mm
- Total unit height 650 mm
- Inner height 595 mm
SKU: n/a - New Product, Wax Melting
Sterilisator Wax Melter 50L
Specifications :
- Heater output 2 kW
- Power supply 230V• Capacity 50 l
- Temperature regulation 0 – 120 degrees
- Weight approximately 40 kg
- Drain valve of heating liquid 1/2″
- Water drain valve 5/4″
- Wax drain valve 3/4″
- Outside diameter 500 mm
- Inner diameter 400 mm
- Total unit height 550 mm
Required quantity of thermal oil 30l.
SKU: n/a - Varroa Control and Hive Care
Apitraz® Varroa Treatment, Batch 300241801, Exp 10/2024
Developed and manufactured by Calier Laboratories in Europe
Apitraz® is an Amitraz based product for the treatment of varroa destructor in Apis Melifera. Treatment with Apitraz requires you to use two easy-to-use strips per brood box this will provide the correct dose to control varroa and prevent resistence from occuring.
- Active substance with demonstrated efficacy of 99% against varroa mites.
- Not Harmful to Bees.
- Easy self-hanging mechanism, simply fold the two tabs and insert between frames.
- 10 week treatment period, which can play a key role in reducing reinfestation.
- No residue in wax or honey.
- Packet of 10 strips.
- Apitraz has a shelf life of 18 months from the date of manufacture.
Buy 1 or more packs – £31.85
Buy 5 or more packs – £28.66
Buy 10 or more packs – £27.07
Buy 50 or more packs – £25.48SKU: n/a - Frames, Wax Melting
Electric Steam Boiler 160L
Made from galvanized steel sheet the cylindrical tank has double walls with the space between the boiler and the outer casing filled with insulating material. The heating element is built into the bottom of the tank and a removable lid closes off the top.
SKU: n/a