Hot Water Wax Melting Tank 100L

Specifications :

  • Heater output 2.8 kW
  • Power supply 230V
  •  Capacity 100L
  • Temperature regulation 30 – 95 degrees
  • Weight approximately 26 kg
  • Insulated with mineral wool
  • Drain valve of heating liquid 1/2″
  • Water drain valve 1″
  • Wax drain valve 1″
  • Outside diameter 600 mm
  • Inner diameter 500 mm
  • Total unit height 650 mm
  • Inner height 595 mm

£1,295.00 inc. VAT

This device is relatively simple to use. Pour water into the tank up to the height of the upper ball valve. Put the pieces of wax into the water and start the melter set at 80°C. When the process of separating the wax from the impurities is complete, unscrew the lower ball valve. Contaminated water will flow out of it, and then liquid wax will show. Then close the lower valve and place a clean bucket with a sieve under the wax drain valve (upper). In this way, we obtain pure liquid wax, which can be left to clump for a few hours or immediately used, for example, for the production of candles. An unquestionable advantage of a water melter is the ability to quickly, safely and easily dissolve larger amounts of beeswax compared to traditional methods.

Categories: ,