No products in the basket.
Processing
Showing all 41 resultsSorted by price: high to low
- Processing
Heather Loosener
The Lyson heather loosener is used for loosening heather honey. It is made of stainless steel and the machine has two plates with spring loaded needles. The frames of heather are placed between the two plates and the ergonomic lever is pushed to load the needles into the frame, agitating the honey and causing it to liquefy. The frames are then placed into a tangential extractor for extraction.
SKU: n/a - Creaming Machines, Processing
Small Honey Dryer
This device is a very compact honey dryer. It’s a great addition for those who are limited with space.
If honey has excess moisture, it needs the water evaporating from the honey. This can be done using this small honey dryer. The honey runs through the honey cascade, a series of solid metal sieves, and the connected dehumidifier dries the air in a closed circuit without touching the honey. The ideal fluidity of honey through the cascade is 15 kg in 30 minutes.
The honey is warmed up a little via the heating system and slowly flows through the cascade. The temperature in the cascade and the hose is regulated by a heating coil. It is important that the honey does not go through the device too quickly. If the honey is too runny, it will need to cool down.
The honey runs down into the settling tank at the bottom which has a convenient tap for bottling.
SKU: n/a - Processing, Uncapping Tables and Trays
Universal Heather Loosener
Manufactured from stainless steel the Abelo heather loosener can be used for all types of frames. This versatile machine uses spring loaded needles to agitate the honey in the frame causing it to soften prior to extraction.
The frame is placed between the metal plates and then using the ergonomic lever the needles press into the honeycomb as the frame moves along each with each motion.SKU: n/a - Processing, Uncapping Tables and Trays
Heather Loosener Pro
Manufactured from stainless steel the Abelo Heather Loosener Pro uses a combination of weight and gravity to gently agitate the honey within the frame without the need for excess pressure.
Can be used for all types of frames.
Weight 3.5 kg
SKU: n/a - Honey Warming, Processing, Strainers
Conical Heating Spiral, Ø200mm
This conical heating spiral has been developed to aid and improve the filtration of honey. It allows the honey to be heated during filtration. This enables clear and pure honey to be filtered at a faster pace than without the use of the heating spiral.
Technical data:
- the device is made of stainless, acid-resistant steel
- power supply: 230 V
- heating power 65 W
- dimensions: length 380, width 200, height 380 mm
- weight: 1.25 kg
- the product complies with the requirements of Directive 2006/95 / WE, meets the requirements of the standards: PN EN 60519-1 and PN EN 60519-2 – “Safety of electrothermal devices, requirements for resistance devices”
SKU: n/a - Processing, Uncapping Tables and Trays
Uncapping Tray – Plastic
Plastic uncapping tray with metal frame rest. Suitable for frames of all sizes of frames which are placed on the frame rest allowing for ease of uncapping and collection of cappings and honey into the tray below.
Colours may vary.
SKU: n/a - Bottling Machines, Buckets, Hive Tools, Smokers etc., Processing, Tanks, Bottling, Valves
Tilting Stand
Bottling Machines, Buckets, Hive Tools, Smokers etc., Processing, Tanks, Bottling, ValvesTilting Stand
Designed to make the home bottling process easy. Made from wood the stand allows you to tilt the honey bucket at varying levels using the wooden bar.
This stand has a gas hinge on both sides to assist with the tilt.
Dimensions:
400mm x 400mm square
150mm high
SKU: n/a - 12 Frame National Poly Hive, 12 Frame National Poly Hive 14 x 12, Processing
National 12 Frame Hive – 8 Way Clearer Board
12 Frame National Poly Hive, 12 Frame National Poly Hive 14 x 12, ProcessingNational 12 Frame Hive – 8 Way Clearer Board
Poly crown board painted with 8 Way Bee Escape.
This clearer board is suitable for our National Poly 12 Frame Hive. A simple and effective way to clear bees from your supers. The clearing process takes approximately 12 hours. The clearer board must be placed with 8 way bee escape underneath.
Colour may vary.
SKU: n/a - Gift Ideas, Processing
Honey Refractometer
The refractometer is an optical instrument to measure the water content and the nutrient grade of the honey. Comes with case, cleaning cloth, pipette and full instructions.
The set does NOT come with a calibrating stone nor calibrating oil as stated in the instructions. These are for a slightly different model.
SKU: n/a - National Poly Hive 14 x 12 with Shallow Roof, National Poly Hive with Shallow Roof, Processing
National Shallow Roof Hive – 8 Way Clearer Board
National Poly Hive 14 x 12 with Shallow Roof, National Poly Hive with Shallow Roof, ProcessingNational Shallow Roof Hive – 8 Way Clearer Board
Poly crown board with 8 Way Bee Escape.
This clearer board is suitable for our National Poly hive with shallow roof. A simple and effective way to clear bees from your supers. The clearing process takes approximately 12 hours. The clearer board must be placed with 8 way bee escape underneath.
Colour may vary.
SKU: n/a - National Poly Hive 14 x 12 with Deep Roof, National Poly Hive with Deep Roof, Processing
National Deep Roof Hive – 8 Way Clearer Board
National Poly Hive 14 x 12 with Deep Roof, National Poly Hive with Deep Roof, ProcessingNational Deep Roof Hive – 8 Way Clearer Board
Poly crown board with 8 Way Bee Escape.
This clearer board is suitable for our National Poly hive with a deep roof. A simple and effective way to clear bees from your supers. The clearing process takes approximately 12 hours. The clearer board must be placed with 8 way bee escape underneath.
Colour may vary.
SKU: n/a - National Hive - CEDAR 2nd Quality, National Hive Western Red Cedar, Processing
National Cedar Hive Crown Board – 8 Way Clearer Board.
National Hive - CEDAR 2nd Quality, National Hive Western Red Cedar, ProcessingNational Cedar Hive Crown Board – 8 Way Clearer Board.
Wooden board with 8 Way Bee Escape.
This clearer board is suitable for our National wooden hives. A simple and effective way to clear bees from your supers. The clearing process takes approximately 12 hours. The clearer board must be placed with the 8 way bee escape underneath.
SKU: n/a - Processing
Stainless Steel Honey & Wax Scraper
They’re made for scraping the wax and honey off the uncapping tank, buckets etc.
Heavy duty made of Stainless Steel.
With this scraper you can do the following jobs.
– Remove wax residue from the frames before uncapping
– Remove wax residues from the inside of the beehives
– Skim or scrape off solid honey
SKU: n/a
