National Poly Hive with Shallow Roof (New design)
Showing all 20 results
-
National Poly Hive with Shallow Roof (New design)
National Poly Hive with Shallow Roof
This National mould is as durable as our deep roofed poly hive and is a single moulded high density polystyrene hive (160g/litre). It provides enhanced insulation properties and strength and comes ready painted and ready to use straight from the box. As with our original poly hive, they are also embossed on the top and bottom of both the brood boxes and supers with rigid plastic. Feeder is not included.
Sometimes there is water ingress in the runners of the boxes, because the two plastic surfaces are not watertight and plastic cannot absorb water like wood. This is normal and if found a problem can easily be rectified by smearing Vaseline on the top of the plastic runners to create a watertight seal.
SKU: n/a -
National Poly Hive with Shallow Roof (New design)
National Poly Varroa Floor
The alighting board on the floor has been shortened to allow for better storage of hives during transport and completing the slim lined aesthetic look of the hive. This modification shouldn’t affect the bees returning journey back to the hive and still provides enough of a board for them to land on. Comes with poly tray.
SKU: n/a -
National Poly Hive with Deep Roof (Old design), National Poly Hive with Shallow Roof (New design)
National Poly Brood Box
National Poly Hive with Deep Roof (Old design), National Poly Hive with Shallow Roof (New design)National Poly Brood Box
Our brood boxes have an improved aesthetic look and greater ergonomic grip on two faces of the boxes. The supers have 1 entrance hole in the middle of the front face of the box, to give flying bees quicker access to the honey supers and the brood has 1 entrance in the middle of the front face, allowing you to perform advanced manipulations to the brood for increase or swarm control. They are also embossed with our company name on them.
The Brood Body holds 11 Hoffman frames.
SKU: n/a -
National Poly Hive with Shallow Roof (New design)
National Poly Shallow Roof
Our new roof sits snugly on top of the crown board, giving the entire hive a slim-lined look. It is embossed with a recessed plastic hive strap guard which runs across the middle of the roof for extra protection when strapping up hives for transport or winter. On the underside of the roof there is also a recess 20mm in from it’s circumference to provide a snug fitting onto the crown board.
This roof works best with the new design crown board.
SKU: n/a -
National Poly Hive 14 x 12 with Deep Roof, National Poly Hive with Deep Roof (Old design), National Poly Hive with Shallow Roof (New design)
National Poly Super Box
National Poly Hive 14 x 12 with Deep Roof, National Poly Hive with Deep Roof (Old design), National Poly Hive with Shallow Roof (New design)National Poly Super Box
Our super boxes have an improved aesthetic look and greater ergonomic grip on two faces of the boxes. The supers have 1 entrance hole in the middle of the front face of the box, to give flying bees quicker access to the honey supers and the brood has 1 entrance in the middle of the front face, allowing you to perform advanced manipulations to the brood for increase or swarm control. They are also embossed with our company name on them.
The super holds 11 Hoffman frames.
Colours may vary.
SKU: n/a -
National Poly Hive with Shallow Roof (New design)
National Poly Crown Board
There is a lip running around the circumference of the crown board which fits into the recess of the roof’s underside securing it for transport and preventing it from sliding. In the centre of the board is a moulded docking station for one of our 2.5L Ashforth feeders and a hole at one end of the dock, allowing the bees to come up from the brood box and into the feeder.There is also an additional circular hole in the centre of the dock for fondant. Comes complete with polystyrene plug and vents for both holes.
Feeder not included.
SKU: n/a -
National Hive - CEDAR, National Poly Hive 14 x 12 with Deep Roof, National Poly Hive with Deep Roof (Old design), National Poly Hive with Shallow Roof (New design)
Queen Excluder – Wired, Oak Framed
National Hive - CEDAR, National Poly Hive 14 x 12 with Deep Roof, National Poly Hive with Deep Roof (Old design), National Poly Hive with Shallow Roof (New design)Queen Excluder – Wired, Oak Framed
Made from round wires that are accurately spaced in a metal frame, secured into a wooden oak frame. Single bee space.
SKU: n/a -
National Poly Hive 14 x 12 with Deep Roof, National Poly Hive with Deep Roof (Old design), National Poly Hive with Shallow Roof (New design)
Abelo Bee Hive Paint
National Poly Hive 14 x 12 with Deep Roof, National Poly Hive with Deep Roof (Old design), National Poly Hive with Shallow Roof (New design)Abelo Bee Hive Paint
Product details:
– High resistance to weather conditions (UV radiation, humidity)
– Abrasion-resistant and water-repellent
– Excellent adhesion on various surfaces
– Resistant to microorganisms
– Resistant to penetration of chloride ions and SO2
– Paint safe for beesSKU: n/a -
Langstroth Hive - POLY, National Hive Poly & Cedar, National Poly Hive 14 x 12 with Deep Roof, National Poly Hive with Deep Roof (Old design), National Poly Hive with Shallow Roof (New design)
Plastic ring
Langstroth Hive - POLY, National Hive Poly & Cedar, National Poly Hive 14 x 12 with Deep Roof, National Poly Hive with Deep Roof (Old design), National Poly Hive with Shallow Roof (New design)Plastic ring
The plastic ring to secure the ventilating plug into our crown boards (National or Langstroth).
1 plug per pack.
SKU: n/a -
Langstroth Hive - POLY, National Poly Hive 14 x 12 with Deep Roof, National Poly Hive with Deep Roof (Old design), National Poly Hive with Shallow Roof (New design)
Plastic ventilating plug, round
Langstroth Hive - POLY, National Poly Hive 14 x 12 with Deep Roof, National Poly Hive with Deep Roof (Old design), National Poly Hive with Shallow Roof (New design)Plastic ventilating plug, round
To fit into our crown boards (National or Langstroth). Needs a plastic ring to secure into the crown board.
1 plug per pack.
SKU: n/a
