No products in the basket.
Strainers, Tanks, Bottling, Valves
Honey Settling Tank 70L with Conical Strainer
Availability:
In stock
We have created this specially designed strainer equipped with a large fine mesh conical sieve to ensure smooth operation when straining honey. The conical sieve in this set has the largest surface area of any sieve on offer, which prevents clogging and ensures faster honey flow. The strainer has been equipped with two valves – one for draining the cleaned honey and the other for impurities (opened only after the straining is complete).
£375.00 inc. VAT
In stock
Versatile use:
The strainer can be used on its own or in combination with a coarse strainer to thoroughly clean honey of impurities.
Advantages:
- Large sieve surface for smooth operation
- Fine mesh for thorough filtering
- Can be used with coarse strainer
- All components are made of high quality stainless steel
- Settling tank with comfortable handles
- Two valves in the settling tank for efficient straining of honey
Additional information:
- Material: stainless steel
- Diameter 400 mm
- Height 605 mm
- Woven mesh: 0.8 mm mesh/ 0.40 mm wire.
- Valves: 2 x flap valve 6/4”
ATTENTION!
Make sure the lower valve is closed when using the settling tank! The upper valve must be open for the cleaned honey to flow to the next tank.
Related products
- Strainers
Heated Honey Sump 1000mm
Designed specifically for the clarification of large quantities of honey.
This Honey Sump comes fully insulated. The body of the sump can be set to a temperature between 30 -55 degrees.
Honey from the extractor is fed into the sump in its raw state. This flows through the sump passing through different grade filters each removing wax and cappings from the honey whilst it is gently heated. The clarificaton process is complete once the honey passes through the finest grade filter.
SKU: n/a - Pumps, Strainers
Vertical Multi Filter
This verticle filter is equipped with 4 nozzles and allows easy filtering of honey via a pump. The vertical pipe is finished with the
connector that enables easy filter-to-pump hose insertion. Each of these 4 filters can be switched on or off by turning the appropiate valve which is also useful during the cleaning of each filter.The entire set rests on 4 legs with adjustable spacing for easy fitting onto all types of uncapping tables (the table is not a part of the device – to be purchased separately).
- 2 stainless steel acid resistant pipes 48mm (6/4”) diameter.
- 42 mm (5/4”) with ball valves and flexible sieves.
- The filter can be fitted onto 1000 or 1500 mm tables.
SKU: n/a
