Creaming Machines, NEW, Processing
Small Honey Dryer
This device is a very compact honey dryer. It’s a great addition for those who are limited with space.
If honey has excess moisture, it needs the water evaporating from the honey. This can be done using this small honey dryer. The honey runs through the honey cascade, a series of solid metal sieves, and the connected dehumidifier dries the air in a closed circuit without touching the honey. The ideal fluidity of honey through the cascade is 15 kg in 30 minutes.
The honey is warmed up a little via the heating system and slowly flows through the cascade. The temperature in the cascade and the hose is regulated by a heating coil. It is important that the honey does not go through the device too quickly. If the honey is too runny, it will need to cool down.
The honey runs down into the settling tank at the bottom which has a convenient tap for bottling.SKU: n/a£1,450.00 inc. VAT
Honey Warming, NEW, Tanks, Bottling, Valves
35l/50kg Heated Stainless Steel Bottling Tank
A new, innovative honey bottler. This honey bottler has a sloping floor and heated bottom. The sloping floor enables the honey to be completely emptied without tilting the container. In addition, the bottom is welded on the edge and can therefore be ideally cleaned without the rest of the honey remaining in the lateral gap.
The outlet valve is 105 mm from the ground.
SKU: n/a£249.00 inc. VAT
- 500 watts/230 volts
- Diameter 309mm
- Height 610 mm
- Temperature range from 20 – 45 degrees
National Shallow Plastic Foundation x 1
- Length: 337mm
- Height: 125mm
- Width: 3mm
Plastic foundation is cut to fit in between the side bars and as such it should not be pushed into the channels of the side bars.SKU: n/a£1.00 inc. VAT